Support Centre for Installers

In single-phase, 10 microinverters can be connected. In a three-phase installation, up to 30 microinverters can be connected on a single 20A three phase circuit breaker. Larger systems can be constructed with multiple AC branch circuits.

No, export limiting functionality is not yet compliant with RD 244/2019. Most installations with Enphase microinverters are residential scale (below 15kW) and are easily accepted without this compliance.​

Each microinverter is a single phase device. Three-phase installations are constructed with single phase microinverters distributed across the phases. The inverter will monitor power consumption at each phase using the CTs connected to the Envoy-S communications gateway, limiting grid export to the defined level, either on a per phase or aggregate basis as required.​In three-phase installations, can you divide surpluses by phases?

If an issue is detected via the Enlighten monitoring platform, please contact Enphase Customer Support. If the issue is related to the microinverter, Enphase will provide any service required under their warranty coverage. If Enphase determines the issue is related to the panel, the service will be transferred and supported by Maxeon Solar Technologies under the appropriate SunPower panel line warranty.

There are a number of methods but often cell customers use a soldering iron. Also we have an instruction guide that explains how to connect the cell and tabs so feel free to contact us from the inquiry page.

Not all solar systems are created equal. Of all solar panels on the market, SunPower panels convert more sunlight into electricity. This means our solar panels generate more power than conventional panels1 within the same amount of space and you’ll need fewer solar panels to produce the energy you need. You can maximise your available roof space to choose the best, unobstructed location for electricity production. You'll save more money on electricity costs over time with SunPower.

Every single panel is electrically tested and inspected for cosmetic criteria at the end of the production line. Regardless of the cosmetic grade, the cosmetic effects do not affect performance or reliability.